Pitch Witch LFO ticking

beedoola

New member
I had harvested two of the 47uf caps for another project and now that I got them back I damaged the positive pad for the cap circled in the picture.

Does anyone know where this positive end goes?


So I fixed the initial issue but now I have some LFO ticking. I tried what I read by some people on the tag board effects of cutting the trace - I cut the socket - to pin 8 on the JRC and ran a 200om resistor from the 9v tap to pin 8 and then a 100uf electro from pin 8 to ground and that didn’t help.

Anyone have LFO tick in their build and solve it?
 

Attachments

  • 1A5AF7E1-1960-4B38-82C8-02FA1E752303.jpeg
    1A5AF7E1-1960-4B38-82C8-02FA1E752303.jpeg
    217.8 KB · Views: 13
Last edited:
look at the lower left part of the schematic in the build document to see the 47 U cap. The positive side connects to 5 thing. Make sure the other 4 things are connected to each other using your meter, and then connect your + side of the cap. IC2 is probably the closest point to connect. Make sure you connect to the Voltage In side that is getting the full input power.
 
Back
Top