Post your tiniest vero builds!

MBFX

Well-known member
I just found this 3x10 Electra and built it with scraps on my desk. It's TINY! Cuts are kinda hard to see and the diagram is perfboard, but it is meant to be vero per the author. What are the smallest vero builds you have in your stash?

1702970741587.png
 
Last edited:
(a while ago) slapped this one together after work with whatever was lying around
 

Attachments

  • 7589679B-6DA7-4ABB-8DA4-C609FD12BC9A.png
    7589679B-6DA7-4ABB-8DA4-C609FD12BC9A.png
    372.6 KB · Views: 32
  • F968977B-6D7B-4D75-B0E5-D970663AF99D.jpeg
    F968977B-6D7B-4D75-B0E5-D970663AF99D.jpeg
    422.6 KB · Views: 31
  • 7C93C1BD-C541-4D0A-8369-0903A4172694.jpeg
    7C93C1BD-C541-4D0A-8369-0903A4172694.jpeg
    370.5 KB · Views: 31
I don’t have any photos of mine, but I built an Emerson Em Drive on this vero - 6x6 if you don’t use the mojo PIO caps. 5 components, no jumpers, no cuts. Off board wiring takes twice as long as the board, lol. But it really sounded nice!
I think you could probably omit the volume too and maybe trim it down a little further as a one-knobber.
 
Back
Top