PPCB Phase II [1590B]

J

jcpst

Well-known member
Build Rating
5.00 star(s)
I’m excited about wrapping this one up. I love the Duo-Phase, but it’s large. While I really like two phasers, I can do my thang with one phaser.

This board has a compact layout. Which is cool, because I was able to fit it in a 1590B, my preferred enclosure size. I used the 2.5mm wide 470nf caps, a low profile foot switch, and a Cusack enclosure.

So far, this is my favorite phaser. This one was for my board before I started working on it.

For the trimmers, I just turned them until I got the sound I liked the most.

The labels are hard to see, but that’s ok for me- I know what they are.


IMG_3560.jpeg IMG_3559.jpeg IMG_3562.jpeg
 
MichaelW said:
Well crap, now I need to re-house mine in a 1590b!!!
Click to expand...
I mentioned the Cusack enclosure (the “pro” enclosure at stomp box parts), but to add to that, I wasn’t able to fit this in a regular 1590B as-is. The one I use has an extra 1mm of clearance due to thinner walls, and it makes the difference when trying to box this one up.

While I could put the board inside a regular 1590B, I wasn’t able to get it to sit deep enough. I bet a few 0.1mm of sanding on the pcb or filing on the inner enclosure walls would do the trick.

Synchrony Pedalworks said:
Wow! Great build Anyone else drooling over the ground wiring? That looks really sleek and clean!
Click to expand...
Thanks! That was a happy accident. I absentmindedly stripped all the insulation off my ground wire instead of just the end, so I rolled with it.
 
You must log in or register to reply here.
Back
Top