Pro-10 Dual muddy Green side

[sceb]

Hello friends,

I’m new to the game and not that good in electronics but I’m willing to learn and want to build some more pedals.
I already build two single drives and they work pretty good.
But i have trouble with my green side of the Pro-10 dual. It is very muddy. I saw the thread of the single Pro-10 green that was muddy to but that didn’t helped me a lot.

I checkt if all the resistors were correct and they are. At leased from my measurements.

Maybe someone sees or knows the problem. If not I’m thinking about buying a new one and take more time and effort to do every joint cleaner then this

Thanks for every comment

 

[spi]

Check the capacitors too. It looks like this is 272, which is 2.7nf. But I think the circuit wants 27n.
I didn't check all of them though, so could be others.

 

[sceb]

Check the capacitors too. It looks like this is 272, which is 2.7nf. But I think the circuit wants 27n.
I didn't check all of them though, so could be others.


View attachment 50166View attachment 50167

You are right, thanks for the hint
I am sometimes a little confused by the label of the components

 

[sceb]

I found 4 other capacitors
Instead of 3 82n I got 823 and one 272 instead of an 27n

Turns out they send me the wrong ones (did not order from here) I am from Germany and got it from another website

I am ordering the right ones and post the result in a few days

 

[music6000]

823 = 82nF, ie 822 would be 8n2 or 8.2nf, 824 would be 820nF
272 = 2n7 or 2.7nf, 273 = 27nF, 274 would be 270nF
Measure Values with your Multi Meter before installing ie Resistors & Caps!