O ogm721 New member May 11, 2021 #2 Here's the other side. I placed a piece of cardboard covered with electrical tape between the pots and the board. I also added electrical tape between the bottom and top pots. Upvote 0 Downvote
Here's the other side. I placed a piece of cardboard covered with electrical tape between the pots and the board. I also added electrical tape between the bottom and top pots.
O ogm721 New member May 12, 2021 #3 Got it working! The wiring on the jacks were wrong. :/ Upvote 0 Downvote
AgAuthority Active member May 12, 2021 #4 That's where I start troubleshooting--done it twice myself..... Upvote 0 Downvote
