Muroidea with no sound when engaged?

[seangarland123]

Looking for some input as to why I am getting almost no volume when this pedal is engaged.

It is the Muroidea pedal from PedalPCB. The only substitution I made was to use the OP07 instead of the LM308.

When the pedal is off, I get a full clean tone. When engaged, and even with the volume and distortion knobs cranked, I get almost no audible sound.

 

[music6000]

Confirm R5 - 47r = Yellow, Purple, Black, Gold, Brown.

 

[seangarland123]

Confirm R5 - 47r = Yellow, Purple, Black, Gold, Brown.

Confirmed that it is correct.

 

[music6000]

Confirmed that it is correct.

I can see that you have reflowed the pads on components from the top as there is lots of solder.
Did you remove any components & resolder during the Build???
You will have to remove from enclosure & Check for Debri & solder that maybe causing your issue as without seeing the back of the PCB, it is hard to troubleshoot.