- Build Rating
Here’s chuck’s thread about this circuit:
I like it- I can get that blown-out sound, and the gain stages provide a variety of tones. It was fun with a tele. Thanks @MichaelW for the board!
This was inspired by Music6000. He sent me pix of a pedal he bought called the Canaglia and a link to a schematic on FSB. A simple circuit, 3 knobs, basically an Electra driving a SHO. I made a couple of improvements to how the GAIN & DRIVE pots are connected and here it is.
This is a setting for medium overdrive with low-output pickups.
Knobs (L-R): LEVEL - DRIVE - GAIN
The GAIN knob controls how much diode clipping we get and the DRIVE knob controls how much MOSFET clipping we get. Even with the Tele's bridge PU, it was a little bottom-heavy, so I reduced C1 from...
This is a setting for medium overdrive with low-output pickups.
Knobs (L-R): LEVEL - DRIVE - GAIN
The GAIN knob controls how much diode clipping we get and the DRIVE knob controls how much MOSFET clipping we get. Even with the Tele's bridge PU, it was a little bottom-heavy, so I reduced C1 from...
I like it- I can get that blown-out sound, and the gain stages provide a variety of tones. It was fun with a tele. Thanks @MichaelW for the board!
