Rockman X100 Rev 10 Pedal

[CarvinDC125]

This is what the main board looks like now.
Everything is combined into one board except the internal power supply which has its own daughter board. The board is quite large.
I am working on shrinking it now for the final revision of the V2.
That revision will be modified into what will be a truly innovative and new Rockman X100 circuit.

 

[529toneworks]

@Cybercow - I'm very interested in building one of these and/or sourcing PCB's / enclosures form you if/when they're ready for sale. PLEASE let me know.

 

[Cybercow]

@Cybercow - I'm very interested in building one of these and/or sourcing PCB's / enclosures form you if/when they're ready for sale. PLEASE let me know.

TBH, it is a very complicated build and costs about $300 to $500 just for the parts - depending on whether or not you want a finished enclosure. The blank enclosure alone is $50 (plus S/H) and a single finished enclosure is about $365. The only way we were able to keep the sales cost below $700 was to buy the finished enclosures in bulk. And we've used all those up. We're gearing up for a smaller version in a 1590D enclosure and when we get there, I'll make a post about it.

We've had to migrate to the smaller PCB and enclosure because the enclosure costs are phenomenal. And the MN3011 has gone the way of the Dodo - except for one seller on eBay & Reverb who wants $100 each for them. So we've decided to use the FV-1 with custom rolled patches to match the original X100. Hopefully by summer we'll have a major announcement.