Seabed Delay quiet.

[Diatrive]

Hello all,

It's your favorite idiot again. I just built a Seabed Delay and it is super quiet. I compared it against a Disaster Report Jr.(I built) and a Dispatch Master and it is much much quieter. I replaced the TLO72 with a OPA2134 to try to help. It sounds a touch better I think with less noise but still it is very quiet. Anyone have any ideas?

 

[zgrav]

When you are using the pedal, is ALL of the signal much quieter? Or just the delayed parts? If everything is much quieter than the bypassed signal, double check the part values for R2, R3, R4, R5 and R6. What voltage are you getting on pin 3 and pin 5 for your op amp?

 

[Diatrive]

Ahh, I normally go over my resistors but didn't this time till you mentioned it. I found a mistake early on. I had a 22k in a 360k slot. I don't have any 360's only 330 and 390. I put a 330 in there and it is more up to volume. When I get some 360s I will swap it out. Thanks!