Skeptical Buffer

[Robert]

Skeptical Buffer


NOTE --
If you use closed frame Switchcraft style 1/4" jacks you'll need to bend the lug slightly to avoid contact with the adjacent toggle switch lugs. Not a huge issue, but something to keep in mind when assembling.

Open frame and Lumberg 1/4" jacks should have adequate clearance.

 

[Mbens11]

Is the schematic for this one available I would really like to build and am not sure if I am right in my own trace of the circuit

 

[Guardians of the analog]

Is the schematic for this one available I would really like to build and am not sure if I am right in my own trace of the circuit

 

[doublej]

just received pcb586 Rev2. are these cap values correct? looks like 11 25V+

 

[ThePanda]

just received pcb586 Rev2. are these cap values correct? looks like 11 25V+

View attachment 47186

There is a Rev2?
Is this the one with the toggles spaced out more?

 

[Robert]

Yep, nothing changed aside from the switch spacing.

The BOM above is correct.

 

[Boba7]

I cant wait for the schematic!