SOFTii – difference between PDF and PCB

hn2o

New member
Hello everybody,

I realized there are differences between the SOFTii PDF and the actual PCB: on the PCB there is an additional resistor in the bottom row that doesn't appear in the PDF. Also in the upper left row the value for R2 is different than in the PDF. Should I just go with what the PDF says...?

Thanks in advance...
softii_hb.jpg
 
Follow the markings on the PCB.

The updated build docs have been uploaded as well.
I'm digging this out as I have a SOFTii board that I ordered in July 2019, PCB 098, and there are differences between the build doc (09.12.20) and the PCB regarding R1, R11, R14, R21 and R22.

Do I use the values on the PCB?

Thanks.
 
I'm digging this out as I have a SOFTii board that I ordered in July 2019, PCB 098, and there are differences between the build doc (09.12.20) and the PCB regarding R1, R11, R14, R21 and R22.

Do I use the values on the PCB?

Thanks.
I built one of those earlier versions from 2019, followed the PCB and had great results.
 
Back
Top