Sproing Deluxe… done.

analog_bham

analog_bham

Well-known member
Build Rating
5.00 star(s)
Build #2 in the books!

Finished up the wiring today after the B10k mini pot finally arrived. Really like this one. I build a 5e3 a couple of months ago and really wanted a trem/verb to go on a small grab and go board for that amp. This one is perfect! Sounds great. Have wondered about wrapping the LDR/LED with something to make it light tight but it works fine the way that it is.

I like the raw case with these knobs. Anyway… the Mach 1 OD is next on the list I think.
 

Attachments

  • IMG_0774.jpeg
    IMG_0774.jpeg
    725.1 KB · Views: 62
  • IMG_0773.jpeg
    IMG_0773.jpeg
    1,001.1 KB · Views: 64
Hey I was wondering if either of you could help me. I'm looking at building this but on the webpage it says build documentation coming soon... But obviously you already built it.... Am I missing out was that an error on the page?
 
boardsbybarc said:
Hey I was wondering if either of you could help me. I'm looking at building this but on the webpage it says build documentation coming soon... But obviously you already built it.... Am I missing out was that an error on the page?
Click to expand...
I think this post is the closest you’ll get to build docs.

Robert

Post in thread 'Build docs for Sproing Deluxe Reverb'

The completed doc hasn't been posted yet, in the meantime...

Parts list is here:

Sproing Deluxe

Sproing Deluxe Drill Template
forum.pedalpcb.com forum.pedalpcb.com

Drill template is here:

The wiring is fairly straightforward:

Input/Output jacks connect to the IN/OUT pads at the top of the PCB
9V / GND connect to the +/- pads at the top of the PCB
The two 3PDT breakout boards are pin-for-pin direct connections to the pads at the bottom of the PCB


The only "gotcha" on this one is the two 9mm potentiometers.
  • Like
  • Love
 
boardsbybarc said:
Hey I was wondering if either of you could help me. I'm looking at building this but on the webpage it says build documentation coming soon... But obviously you already built it.... Am I missing out was that an error on the page?
Click to expand...
there still is no build document for it AFAIK. when i built it, i searched on here for other builds of it and remember finding one of the unpopulated board. regardless, i do seem to remember that the board you get when you order it has the component values on it. so here is the schematic and the BOM from a quick search here. good luck! it's a great sounding pedal.


 
You must log in or register to reply here.
Back
Top