DailyDovetails
Well-known member
Can I use a 4PDT switch for the gain control and the following diagram to add a volume control for each of the gain channels on the stockade?
My schematic isn’t the best so I will describe it also. The idea is basically to switch to either volume pot like how you would with a 3PDT bypass. My plan was to tie leg 1 of each pot to VREF. Anyone see any issues with this plan? Popping maybe?
My schematic isn’t the best so I will describe it also. The idea is basically to switch to either volume pot like how you would with a 3PDT bypass. My plan was to tie leg 1 of each pot to VREF. Anyone see any issues with this plan? Popping maybe?
