Sunflower fuzz no sound

Budsg

New member
Hello. I have built a sunflower fuzz using ac125 transistors. I have been testing in a pedalpcb testing auditorium and i can hear the pots when i turn them and turning the pots does change the static of the amp but no guitar signal seems to be passing through. Please help.
Thank you
 
Hello. I have built a sunflower fuzz using ac125 transistors. I have been testing in a pedalpcb testing auditorium and i can hear the pots when i turn them and turning the pots does change the static of the amp but no guitar signal seems to be passing through. Please help.
Thank you

Post clear pictures of both sides of your board. We can't troubleshoot remotely without pictures.
 
  • Like
Reactions: fig
It says my file is too large. Do you know how to compress it?

Are you uploading off your iPhone?

If so, here is my surefire upload regime:

1.) Take the pictures and rotate them three times. Save them.
2.) Rotate them one more time. This seems stupid because now they are back being right way up but trust me.
3.) When you attached them to the forum, change the size to Large.

That should work.
 
  • Wow
Reactions: fig
Im working on getting photos posted. I turned the trim pots up and down with no signal getting through but it does seem to change the sound of the amp.
 
i am having no luck on getting photos uploaded. I have no experience using germanium transistors or setting bias. Do you have any tips for me?
Is the orange dot on the ac125 in the same orientation of the tab? Thanks guys.
 
Are you uploading off your iPhone?

If so, here is my surefire upload regime:

1.) Take the pictures and rotate them three times. Save them.
2.) Rotate them one more time. This seems stupid because now they are back being right way up but trust me.
3.) When you attached them to the forum, change the size to Large.

That should work.
I tried the rotation thing, even though I was sure you were joking, it didnt work. Thanks for trying.
 
Back
Top