Terrarium Rev2

[jejj]

Hey Gang,

I was in the process of ordering the parts for my Terrarium build when I noticed there is now a Rev2 board which dropped about a week ago. I have the Rev 1 and Daisy in hand, just wondering if there enough improvements in the Rev 2 to buy the new board as my starting point? Does the Rev2 work better with newer models of the Daisy?

Any guidance here would be appreciate.

Thanks,
Joey

 

[crashguitar]

I just looked at the documentation I have for the 1st rev. and compared it to the Rev 2. It appears that there are a few more resistors and capacitors to deal with a noise issue in the newer Daisy Seed revisions.

You can add the modification to the rev .1 boards with a little extra wiring. See this thread:
https://forum.pedalpcb.com/threads/...tting-unusually-bad-noise-solved.21901/page-2

 

[jejj]

Thanks @crashguitar!! If it only applies to the Rev7 boards, I'm good. I have had the Daisy Rev5 and the Terrarium Rev1 for a bit, so I should be good to go.

 

[Robert]

If it only applies to the Rev7 boards, I'm good.

No need to rebuild, that's all this revision addresses.