Tone Bender Mark II [BreadBoard]

Alright, I'm back (and a little drunk) but I believe this is what my DMM is telling me about the Seeker:

Vcc=9.26V

Q1
Ve=0V (GND)
Vb=0.085V
Vc=8.05V

Q2
Ve=0V (GND)
Vb=0.097V
Vc=0.224V

Q3
Ve=0.135V
Vb=0.224V
Vc=8.18V
 
Thanks Caio. I'll check these against my BB as soon as I'm done with the LGSM for Chuck's tutorial. It's using the PSIO currently.

A little drunk? In which direction are you headed? ;)
 
You may remember my janky rig from another thread, here it is with candy.
I still have a pre-flight to do so I haven't put the current to it yet. If it survives, I'll put it in a box.

bbtsCbX.jpg

kSa0qLm.jpg


if you spot a fault, please let me know.
They pinched those transistors from Telecasters!
 
I just breadboarded an MKII that I really liked, and here's what I got as far as biasing and gain/leakage goes:

BATT: 8.9V // Q1c: 7.8V // Q2c: 0.37V // Q3c: 6.65V
Q1: hFE=77 / leakage=132uA
Q2: hFE=68 / leakage=22uA
Q3: hFE=106 / leakage=279uA

Here's a quick clip:
That sounds so good, better than the mkii I built a few years ago. Maybe I should revisit it with everything I've learned from Chris
 
Back
Top