Tyrian distortion, no output

[Markk]

I cannot figure out why the effect doesn't work. In bypass I have signal, the LED works, when I engage the effect, it kills the signal. I have reflown everything, I've tested my resistors, can't figure it out it's driving me mad, please please help!!

 

[Paradox916]

I would recheck every valve of components upstream of D6 and D7 and make sure those LEDs are oriented and working, (I have gotten a couple dud LEDs before)

 

[BuddytheReow]

It sounds like you need an audio probe as well. This thread will help you

TUTORIAL - Troubleshooting 101

There comes a time for every builder to spend multiple hours soldering, wiring, and breadboarding a certain circuit just to have it work incorrectly, if at all. This could happen on your first build or any build after that. This write up is to help you in your quest to figure out why it isn't...

forum.pedalpcb.com

 

[Paradox916]

It’s hard to telll from your pics but are any of these joints grounding out on the switch C6 C7 C10

 

[Paradox916]

I’m more like wicket… I’m just going to get you into some $h#!