southpaw-dd
Active member
- Build Rating
First of all, really nice sounding pedal. Glad that I took this one on! Need to spend some more time with it and comparing to some other pedals, but it sounded nice in A/B with a Nordland ODR-C I had sitting on the board next to it.
The OnSemi/Fairchild BS170s were purchased from Mouser and tested at ~2.28V Vgs(on), 1.6V Vgs(off), and 1.5 ohms for Rds(on). Seemed to be in good spec!
The enclosure is a Tayda standard PPCB drilled 5-hole. I used the gloss veneer on this one for the color printed areas only and it turned out great to my eye. I certainly recommend building this circuit as the 3-band EQ is nice to have in a low gainer.
I wanted to try the mini brutalist knobs from LMS. I think they work well with the 5-hole setup.
The OnSemi/Fairchild BS170s were purchased from Mouser and tested at ~2.28V Vgs(on), 1.6V Vgs(off), and 1.5 ohms for Rds(on). Seemed to be in good spec!
The enclosure is a Tayda standard PPCB drilled 5-hole. I used the gloss veneer on this one for the color printed areas only and it turned out great to my eye. I certainly recommend building this circuit as the 3-band EQ is nice to have in a low gainer.
I wanted to try the mini brutalist knobs from LMS. I think they work well with the 5-hole setup.
Last edited:
