Woodpecker Tremolo Q2 2N2646 Orientation

No no, I wasn't suggesting that.

I don't have one of these built at the moment to try this myself, but if you're feeling experimental....

Try each one of these modifications one at a time, test it after each one and see if there is any improvement.

  1. Remove R3 (100K)
  2. Disconnect lug 3 of the Depth pot, reconnect it using a 1uF electrolytic cap. (Positive lead to the Pad, Negative lead to Lug 3 of the pot)
  3. Increase the value of R7 (currently 470R) to 1K - 2K2.
  4. Increase the value of R6 (currently 39R) to 100R
Let me know if any of this helps.
Ended up doing all the mods listed. Still has audible ticking noise.
 
Back
Top