chongmagic

Gweike G2 Max 50w.

Yes, sorry that is the Magnetron Delay.

One of my favorite delays,

I updated the BOM scraper tool today, it should now be able to handle and process build documents from many different sites. Again let...

Let me know if you run into any issues.

I will fix where it resets that after your data has been cleared. Thanks for pointing that out!

The "Clear Form" button should clear all of your current data. You can also input your own values or make edits in what is scraped from...

Thanks for the feedback guys! This is exactly why I wanted to get other eyes on it. @Caedarn Resolution - The tool uses a...

********************** I have been working on a UV Artwork Generator. If you don't have Illustrator or hate dealing with layer...

So these Tayda enclosures don't use powder coat, they use some other type of paint maybe an epoxy. Anyways it is super thick. If it were...

I found this Low Tide that I had some issues with probably over two years ago. I had just built a few so I figured I would take a look...

Still playing around Lightburn and different materials.

This is what Gemini told me: