SOLVED X2 vhs problems.

[Teddeeh]

So i have 2 VHS’s. One the signal only goes through the chorus and reverb, and the other there is no signal atall.
the boxed one has the chorus and reverb signal, the out of box one has nothing. I changed the eeprom around and different tl072’s but no change.

 

[Teddeeh]

Ok, so i get to the tl072 and it drops. I dont think im getting a connection between c1 and pin 3 of the tl072.

 

[Teddeeh]

Fixed! No connection. Soldered a small wire jumping from r3 - tl072 pin3. Solvedered.
the audio probe helped identify where. Then multimeter detected break in circuit. Sorted thanks my loverlies!!! Xxx