fig
Village Idiot
This one's a keeper.
Q1 is ~100 hFE / .190mA IcLeak (OC76)
Q2 is ~186 hFE / .050mA (OC42)
Biasing done with resistors.
It growls, and has decent sustain, so I dood a ting in da right way.
I have a SB translucent red B-box for it. The trimmer will be a full-size pot.
This pic was taken just prior to me realizing I had removed the jumper wire from the 22u to ground (in case anyone noticed).
Q1 is ~100 hFE / .190mA IcLeak (OC76)
Q2 is ~186 hFE / .050mA (OC42)
Biasing done with resistors.
It growls, and has decent sustain, so I dood a ting in da right way.
I have a SB translucent red B-box for it. The trimmer will be a full-size pot.
This pic was taken just prior to me realizing I had removed the jumper wire from the 22u to ground (in case anyone noticed).