OD is Glorious
Well-known member
I too had to crank the gain trimmer.
zero's various pedal builds
- Thread starter zeropluszero
- Start date
zeropluszero
Well-known member
Kewpie Fuzz. Had a rebuild after the last PCB wasn't working, in hindsight it probably was and I'm pretty sure the relay bypass was fucked. Put a new one in and it's fuzzing. Seems kinda noisy though
zeropluszero
Well-known member
Tone Vendor Mk II
Q1 MP42B 46hfe, 166uA
Q2 MP20A 55hfe, 170ua
Q3 GT402E 115hfe, 101ua
20K Trimmer for R7 bias, 8v on Q3 collector.
zeropluszero
Well-known member
Two Tone Fuzz
Q1 MP42B 49hfe, 63uA
Q2 MP20A 50hfe, 63uA
Q3 MP20A 80hfe, 184uA
20K trimmer on R7 here too.
I like bias & impedance both up full with my Tele, with a flick of the switch get the Fuzz Face and Tone Bender MkII sounds really nicely, as such Twin Face and Tone Vendor both for sale.
zeropluszero
Well-known member
Skeptical buffer in matte white. Still makes horrible noise with harmonics switch up, but low and bright are good.
zeropluszero
Well-known member
Caesar chorus. I tried the 12nf cap for bass but then put it in front of my Microtubes infinity and couldn't get enough out of it. Put the original 33nf in and bam, instant 80s.
zeropluszero
Well-known member
Unicab, mostly built it just to sell for cheap, which I did.
zeropluszero
Well-known member
Moonn Asteroid, not really my thing. The metallic brown from Tayda was quite nice though I thought.
zeropluszero
Well-known member
GCI HM-1. Also didn't like this too much, why the hell did I get the LED drilled on the wrong side too?!
zeropluszero
Well-known member
Double Muff, Green Russian and Hitzumitas. I tried to build it so that the tone knob worked the same way on both models, and despite flipping the tone parts (as per my other thread) the scoop is one way on the GR and another on the H...not sold on the massive knobs either. Have a War scythe and Muffin factory in the queue as well.
zeropluszero
Well-known member
GCI socialist jr.
Initial thoughts are I quite like the sound, will need to keep playing with it.
The PCB needs PCB pin switches, so I had to order long arms, which I hate, and the two outer switches are up down, while the mids switch is left right. Abomination PCB design
zeropluszero
Well-known member
GCI NEW HM-2
Wanted to see if splitting the EQ would be good, I do love my Promethium. In my opinion I found that when playing with the GCI, where I preferred to have the high and mid was actually in line - so I guess I'll stick with my Promethium build.
zeropluszero
Well-known member
GCI NEW MT-2
Aw yeh this is a keeper. Quiet and powerful. Need to throw a soft relay in there.
anevilspar7an
Well-known member
You can change the mid gyrator eq to that of the tube screamer, so around 700Hz to get some more seperation between the mids and highs.
zeropluszero
Well-known member
I mean i guess is that when I played my guitar into it, i found it wasnt doing anything my promethium wasnt already, so im happy to let it go.