What’s on *YOUR* workbench?
- Thread starter Bricksnbeatles
- Start date
UtilityBeltFX
Well-known member
The most excited I've been for a thing to build. Don't know why I waited so long. No more premature boxing!
Passinwind
Well-known member
Last customer build in this bass preamp series, naturally I'm finally just about up to speed on building these boards up:
Last edited:
Harry Klippton
Not Interested
I spent a bunch of time this morning cataloging all my hardware so that I know what I have. I don't want to keep ordering stuff I already have it assume I have something just to find out I don't
I did the same a week ago and it's the best thing related to the hobby I've done in a while
Harry Klippton
Not Interested
I make a spreadsheet for every build and now I'm integrating them into a single workbook that will hopefully automatically subtract from my inventory
That's taking it to the next level! I'm updating by hand, but it's okay, it's not like I'm building 3 pedals a day
steviejr92
Authorized Vendor
I need to get on that. I have a habit of ordering things I already have
Cybercow
Well-known member
Interested in one that is started with seed data? I can share it in Excel (PC) or Numbers (Mac).
KR Sound
Well-known member
That would be awesome to see what you did.
Cybercow
Well-known member
Here ya go . . .
This Excel file probably has more than what you need, and perhaps less of some of what you want. But I think it's a good start. You should be able to simple Cancel/Bypass any warnings that pop up the opening.
Harry Klippton
Not Interested
Drilling enclosures
Cybercow
Well-known member
Finally finished the 6-Band EQ (Slider Version) last night. Tight fit but it works a treat!
I altered some of the resistor/capacitor value combinations to alter each band as follows:
Pot #1: 60 Hz
Pot #2; 156 Hz
Pot #3: 272 Hz
Pot #4: 1.86K Hz
Pot #5: 6K Hz
Pot #6: 13K Hz
I find this mod to provide a more useful set EQ bands for my use.
For those wishing to try this mod, I've attached a marked up version the build doc fo the slider version and incorporated the potentiometer version with mark-ups already found elsewhere in this forum. (Don't remember who posted it, but thanks!)
I altered some of the resistor/capacitor value combinations to alter each band as follows:
Pot #1: 60 Hz
Pot #2; 156 Hz
Pot #3: 272 Hz
Pot #4: 1.86K Hz
Pot #5: 6K Hz
Pot #6: 13K Hz
I find this mod to provide a more useful set EQ bands for my use.
For those wishing to try this mod, I've attached a marked up version the build doc fo the slider version and incorporated the potentiometer version with mark-ups already found elsewhere in this forum. (Don't remember who posted it, but thanks!)
Feral Feline
Well-known member
The enclosure for this only needed wet sanding (and labelling) so I got busy and finished the build.
I’ve mentioned these dollar-store stickers before, but never posted a pic. Beats the thin-flimsy paper-strips included in the kit.
Colour-sanding done, need to plug in and calibrate the build and I’m still waiting on friend to send Film-free Decal stuff.
I’ll post more pics later as to why this pedal isn’t done already.
steviejr92
Authorized Vendor
My version of a rat! ABSOLUTELY LOVE THIS SETUP! Going to be moving onto the circuit design!
I cant forget that Chuck helped me tweak a couple things like giving me a tip that you can use a Schottky diode with a resistor in series and get similar results in Vf to a GE diode! He also helped with the COMP setup in my previous revision the way i had it setup the COMPRESSION wasnt strong enough. All in all im very very excited and have big plans for it! Anyone interested in this i highly suggest breadboarding it and letting me know what you think!
BTW DO NOT USE LM741 FOR YOUR OPAMP
I cant forget that Chuck helped me tweak a couple things like giving me a tip that you can use a Schottky diode with a resistor in series and get similar results in Vf to a GE diode! He also helped with the COMP setup in my previous revision the way i had it setup the COMPRESSION wasnt strong enough. All in all im very very excited and have big plans for it! Anyone interested in this i highly suggest breadboarding it and letting me know what you think!
BTW DO NOT USE LM741 FOR YOUR OPAMP
Mentaltossflycoon
Well-known member
A little kiss with a router and we have a happy marriage. Moar wood to be removed soon to make room for the extra pickup and arcade kill switch. The most crucial alterations are now in the bag.
Passinwind
Well-known member
What flavor pickups?
Mentaltossflycoon
Well-known member
A shortlist of things I've been curious about. Jazzmaster shaped j bridge from Mojo, novak fatbucker in the neck, and a cream serek b90 in the middle.
