Guardians of the analog
Papi Fuego
- Build Rating
- 5.00 star(s)

Let's hack a fraudhacker, shall we? Higher, further, faster baby!



So what is the hf-2? If the bf-2 is Miller then the hf-2 is Miller lite. The hf-2 is also basically the bf-2b. Boss is not one to waste and will build multiple pedals on the same board. There are only a few resistor changes between the stock circuit and the hf-2 (no drawn schematic exists of the bf-2b to confirm every value) but the main difference is the MN3204 BBD chip. The MN3204 has half the delay stages of the MN3207, which in turn shifts the frequencies of the modulated signal up one octave. The result is a slightly more subtle flanger that has a slightly sweeter tone that dabbles in DEM territory.
The build was smooth using a fraudhacker board and making the few changes per the boss schematic. Shout out to @Bio77 for shipping me a MN3204 to confirm that everything works while I could find a couple in the wild. I was able to find two more, one for Clinton as well. These are hard to source and many are stupid expensive. There may be another build for a bass board in my future. The calibration is the same as a stock fb-2 and was confirmed by two helpful sources on Instagram who were kind enough to give me clock measurements of their units.
The enclosure is a tayda pastel violet that has a beautiful satin sheen to contrast the gloss UV print. For my design I wanted to pay tribute to the color palette and HF-2 designation and the Higher, Further, Faster (hf-2




Last edited: