Help with DIY bypass switch for Delta Lab ADM 256 and Rockman Sustainor/ chorus&echo

drgonzo1969

drgonzo1969

Well-known member
Greetings! I have a little switching project I was hoping to get some guidance on. I would like to build a pedal that will have 3 switches to bypass 3 different rack effects. I have a Rockman Sustainor, Rockman Chorus/echo, and a Delta Lab ADM 256. All 3 have outputs in the back for a bypass footswitch. I will post photos from the owner’s manual below. Can someone help me understand how to wire this up?
 

Attachments

  • IMG_1724.jpeg
    IMG_1724.jpeg
    897 KB · Views: 4
  • IMG_1723.jpeg
    IMG_1723.jpeg
    906.5 KB · Views: 4
  • IMG_1722.jpeg
    IMG_1722.jpeg
    1.1 MB · Views: 4
  • IMG_1721.jpeg
    IMG_1721.jpeg
    970.2 KB · Views: 3
Sounds like you need a TRS cable, and to connect the tip and ring.

If you've got a TRS cable, you could plug it in and just make the connection on the loose end to verify it works. Easiest would be if you've got a stereo jack so you could connect the terminals on the jack, but you could also just do some janky tinfoil business on the bare end.
 
drgonzo1969 said:
Excellent! Thank you for drawing that up. I’m going to give this a shot when I get off work tonight.
Click to expand...
That's actually probably the fanciest drawing I ever did! Ha! Thanks to @Brett for posting all those component images a while back!

Let me know how it goes! I've got some rack units in the mix I should probably do this for too.
 
You must log in or register to reply here.
Back
Top