chongmagic

No, the ICs, with numbering or lettering are specific for that circuit, the sockets are what you solder in first, that way you can...

Probably would work but the function would be backwards, terms of the sweep of the pot. Yep the black box with 8 legs is the IC. Also...

Tayda's enclosures are hit or miss, they use some sort of epoxy or harder paint that can melt and just cause a mess. If they only...

That is bare metal, I used a black powder coated Hammond enclosure. I have it on order, It should arrive today and I will stick it on...

Coming off the Electrovibe, this is a great vibe as well. I recommend both!

I would first double check that the LED polarity is correct, and that the LED itself is actually good. If the LED is oriented correctly...

Yeah that’s the same analyzer I was talking about. It’s actually really helpful for catching issues before sending the file to Tayda...

If your multimeter has a continuity checker, I would check and make sure these connections are good. Is there is an issue there it will...

I sure don't. I haven't been around to even know he nuked his account! lol

It sounds good, I need to build another one with the bigmonk mods.

Next one of these I build is going into a 1590BB2 enclosure. I am going to have to build the AionFX version next.

Thanks so much for the kind words! I’m glad the tool helped make the process easier. One small note if you run the generated file...

Trust me, you are definitely not alone in the vector-challenged group. 1. UV printing will work on bare aluminum, but many choose to...

Here is the one I just built, I used some T0-92 package J201s. But you need to make sure your J201pcb boards are oriented correctly as...

Try rotating your 2n5088, if that is what you used in Q3.