Stickman393

A'ite, I'm not one to just cowboy shit. I like to sit back and think about how everything is gonna interact. So...I came to the...

Just a quick update here: Ok, so I found some of the parts that were laying around. I replaced a bunch of the caps on the board...

i always thought this was an occam's razor scenario. dunlop was in rapid expansion mode between 89 and 94, for example procuring the...

there has never been a 4.7K in any boomerang. it's always 1k.

There's really no like for like replacement out there. BUT, a small 120vac to 12vac transformer will work. 5va is way more than enough...

I'm referring to the single and dual gang junction boxes they often use: they're like, 16-12 gauge steel sheet. Still sheet metal...

I've been doing mine via solder tabs on the PT mounting screws. They can come loose, but a properly torqued connection with a locknut...

Huh. I kinda *do* hate myself. Hmmmm

Got a 5E3 that's getting close to being ready to be wired up. Waiting on a single resistor. I'm basing it off the RobRob 5e3 with a...

About 5 bucks a pop 🫪. Stupid, yeah. I wanted to do something kinda stupid. There aren't that many resistors in this thing anywho...

Just wanted to provide an update RE: swapping the rectumfrier. Yeah, better. The 5Y3 dropped my B+ too much. With the 250vac...

Pretty soon I'mma gonna be winding my own transformers and rolling my own caps. Once I learn how to create and destroy energy, then I...

Nameplate, work in progress. Gonna do it up on bronze anodized aluminum with my laser engraver, try to match the original old-skool...

Can confirm. Weight reduction equals good playing fast me.

Interesting side effect of the CF back panel: It's very conductive, and makes for a great shield. Seriously, I was poking around...