almondcity

Yep, same here. Starts to get noisy around noon. By that point I found myself backing the master volume off so it wasn’t too noticeable...

Nice build, I love the green. I still have mine in my chain 95% of the time. It is kinda noisy with compression higher than noon. But...

This is my third PPCB compressor build, after a Boneyard Delegate and Thumbsucker. They’re all great, but I find this one particularly...

Everybody needs a little jangle in their life. Me? I need it badly; so once I heard about this pedal, I was all over it. I've been...

Unless you've been under a rock, you know I really like the BMP circuit. That being said, I'd never come up with a truly "Steggo"...

I've built a lot of compressors, and I think it comes down to which style you like best. There's no real way to know that until you try...

I just discovered this new JFET by TI: https://www.ti.com/product/JFE150 A bit pricey, and tiny surface mount, but of all JFETS I've...

*I just posted this report on the PCB's forum of origin but I wanted to share it here too. You guys, I just finished...

Switchcraft #11 is my favorite

Yep, you can do that as long as the pot responding reversely is acceptable.

Random question. If I have an A taper pot wired as a variable resistor, wouldn't swapping lugs 1 and 3 create a C taper pot with the...

https://drill.taydakits.com/box-designs/new?public_key=MDF1cHZ1NXVDeEwrcjhvRVY1d0tuZz09Cg== never shared one of these is this enough?

I'm about to create a template for this, hopefully it works out. I came here to see if there was any but I can share later if anyone...

Health warning, long and wordy post ahead: Ok, so I've been revisiting/fixing/housing half-completed builds as 2023 unfolds. I had...