benny_profane

If you touch the transistor legs with a test probe while they are in the socket, you will apply pressure to the leg which will change it...

This won’t really tell you anything because you’ll be touching the leads to take the measurement. The issue could be that as it is...

Don’t remove the transformer—it is oriented correctly. Pin 1 is on the primary. The transformer used here happens to have equal...

The board house estimates that they'll be finished on friday, so I'll probably have them in hand by the end of next week. I'll make sure...

Mmkay, I put another of the buffer boards into another oscillating build and it took care of that one too, so the latest buffer is good...

I would move the input and output wires away from the PCB, since you have it out. See if it’s picking up noise that way. I seriously...

Unfortunately it does not. When I was doing the new layout I tried to force it into the previous version's drill layout and I couldn't...

@vigilante398 do the new boards have the same drill & vent layout as the V1 boards?

I GOT IT. I got my latest PCB order in today including my two buffer designs, and I just threw one into a previously misbehaving Black...

I haven’t posted anything on this forum in ages, cause I’ve been busy with a lot of projects. Covid has me laid up for a week, so here...

I finally finished my BASS BALLS! I wouldn't consider myself an envelope addict but I certainly am a frequent user and enjoy trying the...