Recent content by Blaise

Hi, does anybody know where to source the LDR for the Delegate Compressor (EQD the warden clone) the build doc says GL5516 (500k dark) but the ones I find typically have a much higher dark resistance (1M to 10M for those sold directly by pedalPCB). Alternately, is there a vactrol ref I could use...

Sure, but why not build 2 different delay then? You're going to end up with duplicate pots for time depth rate, a bunch of switches etc. To make it clear, I still have not figured out how to combine the modulation of the magnetron with the tap functionality of the bontempo.

What I was trying to achieve was using the magnetron's modulation circuit and the bontempo as a substitute for the TIME pot. On the bontempo doc, pin7 of IC1 is labeled modulation PWM. My understanding of the magnetron circuit (confirmed with a sound probe) is that the section of the circuit...

Hi, I am working on a modified Magnetron delay using the electric canary bontempo daughter board https://electric-canary.com/bontempo.html to add tap tempo. My plan is to remove R2 and C2 of the bontempo, connect R11 pin 2 from Magnetron to the G pin of Q1 in bontempo and pin7 of the bontempo...

Have you figured out what the problem was? Your issue looks somewhat similar to what I describe in this post

Hi, I am trying to debug a new sproing build and am stunned... I checked and reflowed all solders, checked for bridges. The led works and I have bypassed signal. What I really don't understand is the following: I get reverb signal out of pin 6 of the belton brick amd pin 2 of the...