Recent content by dlazzarini

  1. D

    Epoxy pour finish

    All of the above and as spi said, I’ve had the best results with a step bit, not too heavy pressure, and slow speed. You don’t want the bit biting in too aggressively. I slowly skim it down. One thing I will add that for some reason seems to help, don’t know why, is I’ll dimple the tape down in...
  2. D

    Highlander External Power

    Could be a room thing. I haven’t had the opportunity to look inside yet.
  3. D

    Highlander External Power

    A buddy of mine just acquired a 9volt external power box made by Highlander Musical Audio Products. From what I can tell it uses a stereo cable from which the ring terminal carries the 9volts from a battery to power the preamp for the pickup inside the acoustic instrument. There is no option on...
  4. D

    PCB Identification

    Awesome. Thanks for the info
  5. D

    PCB Identification

    Really? Thanks for the speedy reply. Can I ask why the change in the op-amps?
  6. D

    PCB Identification

    Hey guys I was just rummaging through some backlogged projects and ran across a board that I can’t identify. It’s a Pedalpcb board that utilizes 1/8 watt resistors. The number on the backside is PCB040. Any help here would be great. I tried entering the number in the search window on the main...
  7. D

    Sanguine build

    Yep. I made it for a friend of mine and gave him the choice of how he wanted the graphics and he chose like the original with a reverse color scheme.
  8. D

    Sanguine build

    First pedal I’ve built for quite some time. I’ve spread myself pretty thin this past year plus lots of “honey-do’s”. Felt good to sneak a pedal in.
  9. D

    Solder won't flow right ...

    What vigilante398 said
  10. D

    Six Band EQ (NOT in a 1590b)

    This is a screen shot of the original eBay post I ordered from. Not sure if they’re still available. Good luck
  11. D

    Six Band EQ (NOT in a 1590b)

    You’re right. Not sure why I put it under general questions. Probably an oversight. Didn’t realize that until you brought it up. Now, how do I move it?
  12. D

    Six Band EQ (NOT in a 1590b)

    Thanks. The enclosure was actually pretty easy but only if you have the right tools. I used a harbor freight drill press. I then orders a drill press table vise that adjusts north, south, east and west in small increments by turning small handles. I used a side cutting mill bit in 2 or 3mm and...
  13. D

    Peavey Backstage 30 - speaker surround gone, looking to replace

    First amp I ever had back in the late 70’s
  14. D

    Kickstart Distortion Mockup Pedal

    This is slick
  15. D

    TUTORIAL Just Got Your Breadboard/Protoboard? Start Here! LPB1 + Some Dirty Mods!

    Thanks for this. I’ve already successfully bread boarded a number of projects but had no idea what all of the parts were doing in relation to each other. This is a great start for me to tinker
Back
Top