Kroars

That’s a different part number. Good to know, if that one works! Thanks. Just looking at the data sheet, looks like they’re a direct...

Seems the converter needed for this build (IAB0105D12) is now obsolete. I did happen to notice Newark had 20+ of them in stock now for...

Please excuse my ignorance. Does this mean I can hook it up the positive and negative to either of the ~ ~? In other words, does it...

The two adjectives I would use to describe this pedal are "greasy" and "swampy". So far, I like the gain at 11:00 and the bass and...

That’s got to be it, all coming down to your local workers. I always opt for DHL, they have been far and away more consistent for me...

https://www.pedalpcb.com/product/pcb501/ https://www.pedalpcb.com/product/pcb687/ https://www.pedalpcb.com/product/pcb463/...

Recently had this same thing happen and it was a bad LM258P from mouser. I’ve built a handful of these with no issue whatsoever. On my...

Decked out with silly expensive components for your pleasure! :D Not sure about those knobs just yet.

Thank you for the detailed answer. I really appreciate that. Best to you and yours!

I didn't want to hijack this thread, so I'll give you the short answer. Lowering R6 increases Q2's collector current, which decreases...

Of course. I have it socketed just in case. I was just curious why R6 and not R8. I socketed both to see for myself. Figured I’d...

About to give the Bias pot a shot. You mentioned also lowering R6 from 46k to 33k for a wider range. Looking at the schematic I’m...

Unless otherwise specified, all voltage measurements are with respect to ground. Making the BIAS pot larger will do it, try B25K. If...

I do, in fact. I actually built a stand alone Cornish buffer (your C-Buffer) and it sounds great. Built two of the Iron Forest side by...

I’ve definitely come across that over the years, you’re absolutely right. Although, I’ve never had a pedal alter the bypassed signal in...