Wondering how you did your art and if you would share the design? I’m not well versed in that and have a naked dandy id love poly or echoflanger artwork for.
Im having this with my new pcb. Tried everything possible reseated, cleaned all pins and flux, even swapped the ne5532 out all with no change.
The retrofit pcb I have recieved is useless.
If you set it high enough to gate the noise it gates ALL signal. Set it low enough to pass signal and it...
Well I popped this thing into a few working builds and now they dont work properly.
Pins are correct. Pcb was cleaned and tested. Its the same problem everyone has mentioned.
You cant set the gate high enough to use it. It kills ALL the signal if you do. Set it low
Enough to have signal and...
I just had one of these arrive but dissapointed it has 5532 soldered onto it? I planned other opamps.
Is this how they ship, or is mine an error? I didn’t notice anything anywhere about them being added. just my mistake?
Thanks!
How about a dpdt (latched or momentary) used to connect the red LED to ground while simultaneously connecting the pot pads for oscillation?
Seems like an easy way to get both without the compromise. Worth testing IMO.
Thanks for pointing this out.
I just tried this with good results, I find a simple switch with the resistance value chosen by ear to be my fave use. With the pot variability I found myself often dialing back to the same sweet spots. With higher settings its a bit too pitch bendy, and with...
Feel free to DM me to talk more about a “parts kit”, but these aren’t “for sale” per se. You’d be relatively on your own. I am flexible but don’t really wanna have to provide support beyond simple questions. No docs etc.
They are not really kit friendly if you get my drift, they match the...