Search results

Cheers, you’re a legend!

That would be SO epic and kind, if you do find it.

Wondering how you did your art and if you would share the design? I’m not well versed in that and have a naked dandy id love poly or echoflanger artwork for.

Oh wow, crazy I had no idea no loop.

Im having this with my new pcb. Tried everything possible reseated, cleaned all pins and flux, even swapped the ne5532 out all with no change. The retrofit pcb I have recieved is useless. If you set it high enough to gate the noise it gates ALL signal. Set it low enough to pass signal and it...

Momentary exist yes, if that’s your preference.

Well I popped this thing into a few working builds and now they dont work properly. Pins are correct. Pcb was cleaned and tested. Its the same problem everyone has mentioned. You cant set the gate high enough to use it. It kills ALL the signal if you do. Set it low Enough to have signal and...

Ok thanks, everyone.

Yes. Amended my title. Thanks.

I just had one of these arrive but dissapointed it has 5532 soldered onto it? I planned other opamps. Is this how they ship, or is mine an error? I didn’t notice anything anywhere about them being added. just my mistake? Thanks!

Thats still an upgrade as the onboard only gates the input boost. Four cable would gate preamp noise also.

How about a dpdt (latched or momentary) used to connect the red LED to ground while simultaneously connecting the pot pads for oscillation? Seems like an easy way to get both without the compromise. Worth testing IMO.

Thanks for pointing this out. I just tried this with good results, I find a simple switch with the resistance value chosen by ear to be my fave use. With the pot variability I found myself often dialing back to the same sweet spots. With higher settings its a bit too pitch bendy, and with...

Feel free to DM me to talk more about a “parts kit”, but these aren’t “for sale” per se. You’d be relatively on your own. I am flexible but don’t really wanna have to provide support beyond simple questions. No docs etc. They are not really kit friendly if you get my drift, they match the...

Hi, thanks, I made it!

Nice job! 👏🏼 I also went the “Endangered” route for my clone. I even found a poly for the input cap. I put the bias external however for more fun with a 33k in place of the 46k. Differences are of course slight. Never did any artwork for mine, need to revisit maybe.

Late to party but GORGEOUS.

Nice work!

Yes 1p8T, no I didnt lay that one out as I preferred, four eeprom 2p4t and indictor lights. will probably fab that eventually. ive got 50 of the duals to off first lol.

Ive done 4 and 8 eeprom already, will work if space permits and your switch wiring is correct.