Recent content by red

i tested the LP2950 with the multi-function tester, and it just say 2 diodes could be it is broken ?

HI, i've tried to built the Q.tune, it doesn't tune, the tuning screeen stay in - posizion, if i press the footswitch it mutes and lets the signal pass, i've measured the voltage and i have those: 1. 9V on Pin 8 of each NE555 (IC3 & IC4). i have 8,78v 2. 5V on Pin 8 of MCP6002 (IC2) i...

hi there! i've added them to the tread, i cleaned the flux with isopropyl alcool to get rid of the flux, I've also redid the soldering

Hi there! i've built a leprechaun, the pedal is working however the L78L33 gets REALLY hot, like burning if touching, firstly I soldered directly, then used sockets and tried with another one and it's getting hot anyway, what can I do to avoid it?

Hi there! i've built 4 skeptical buffers, 3 of them work, the last one not, I've checked and it gets 17v on the tl072, I think it could be the problem, it also make a loud noise when I disconnect the output, I would need the schematic for trying to fixit Have a great day!

Hi there! i have a weird problem i built a D3lay, tested and worked. I plugged it now after some weeks and the first mode isn't working anymore, dead silent, the other two work fine, It's not the switch because i plugged different eeprom and they work fine, I tried to put the D3lay eeprom...

thank you so much!

Hi! if i want to increase the pedal's volume do i need to change the R7? Thank you!

Hi there! i have a question for Fv-1 pedals, i built the ThreeVerb, Deflector and the Octagon, All of them makes a POP when i turn them on( just when i turn them on) since they are reverbs or delays(expecially on delays it gets pop pop pop pop) you can hear it a lot, but no pops when i turn...

HI! you can mod like this so you can get stereo out ( 100 % wet and normal out) but not for the input, if you need stereo in and out your pedal is superego by ehx

i have this one https://docs.pedalpcb.com/project/Pythagoras.pdf I tried to switch the plus and ground of power and it doesn't warm up but this makes no sense to me because there's + an - on the pcb and i followed the connection as in the pdf

HI! i'm Building the pythagoras and i have a problem: I plugged the pedal and heard like frying sound, the transistor instantly becomes super hot Do I have to throw everything away?

This mod is really simple but 100% worth to do, thank you!

Thank you so much, this was gold!

i'm sorry about that,I didn't thought this forum is so active! I deleted them