Recent content by ryugu

Hello. I was wondering if the deflector was based on a particular pedal. I have found some posts claiming similarity with the EQD Afterneath. Would that be the closest production pedal? Just curious because I'm about to build one up.

Thanks! This absolutely sold me. It actually sounds like there's delay in there too. Maybe that's just the modulation???

I'm very curious about this one. Thanks.

UPDATE: I played around with this some more and discovered that UP is JFET mode, and DOWN is the Opamp. So I had it backwards. :oops: So I'll guess I'll be trying a new TL071. This is really the opamp used in the original? Seems odd b/c that is also JFET.

Thanks! Sounds like the c-buffer board would be somewhat redundant, huh?

What kind of buffer? The UberDrive appears to be true bypass unlike the SD-1. I ask b/c I'm considering using a C-buffer board.

Wow thanks. I didn't see that one.

Since they appear to be permanently out of production (please correct me if I'm wrong.) I need something for an UberDrive.

Opamp mode working perfectly and sounds glorious, but the reason I picked this particular boost is to have the choice of two different sounds. I biased both transistors to within about 5% before plugging in a guitar. Very disappointed it was dead silent. Where can I start checking voltages?

Thanks. It turned out that I wired the Awful Waffle wrong. I tried using a breakout board when the circuit isn't even true bypass. 🤦‍♂️

Haha... I figured it out. The Awful Waffle can't use the breakout board because it's not true bypass! SOLVED

Oh wait a minute.... what are P1 and p2 on the v1.95 layout???? Did I wire the switch wrong????

So I tried making a second Hot Cake PCB, and I'm having the exact same issue as the first board. I saw the LED light up when I plugged in my 9v adapter for about a split second and then nothing after that. I plugged a guitar in to check for life, and it sounded like a OD pedal but the volume was...

Could this explain why the LED doesn't light up on both my waffles? Full specs of the zener here.

Is there a minimum wattage for +9v pedals? I think this could explain an issue I'm having with my Awful Waffle. The 8.2w zener diode I'm using is rated at 400mw. Is this too low? Can I test a diode while it's soldered in a circuit? (yes, i realize this is troubleshooting sorta)