Recent content by SimonSudd

Awesome! I'm going to try that. Is the black wire off of the center pin of the footswitch wired to ground on the stage 3? Is the red wire behind the stage 3 going to 9+? Does the other end of the red wire go to the dc jack? Thank you so much.

I just put all the knobs to 12 o'clock position.

PT2399 1. 4.97 2. 2.49 3. 0 4. 0 5. 2.40 6. 2.47 7. 0.59 8. 0.63 9 thru 16 are all 2.49 TL074 1. 4.36 2. 4.36 3. 3.96 4. 8.72 5. 4.36 6. 4.36 7. 4.36 8. 4.36 9. 4.36 10. 4.36 11. 0 12. 4.35 13. 4.36 14. 4.36 LM324 1. 7.38 2. 4.35 3. Cycles from 6.5 to 2.5 and back 4. 8.72 5...

That makes sense. I think it was the positive from the board to the dc jack and the ground to the output jack. Thank you. Can I just shoot the pins listed on the schematic, or should I look up the pin out of each IC and measure those? Thanks again.

So, I was trying to measure power and saw a little spark and afterwards there was no longer silence when I engage the effect, but it's the same sound as bypass sound. What did I break? Thanks.

These are the mods I was trying to follow. https://forum.pedalpcb.com/threads/sea-horse-mods.5162/ The one thing that I noticed where my attempt at recreating what Chuck D. Bones created differs is that I didn't know how he added the LED for rate. So, I skipped it. In doing that I wired the...

I tried to build a sea horse. I thought I could do the cool mods and have a cool, updated piece of gear, but it's not working right. There is no effected sound or LED light when engaged. I do get bypass sound. Thank you.

In my inexperience, excitement and haste I accidentally soldered my pots and switches on the wrong side. I think while I was removing them I destroyed the trace on the third leg of the rate pot. I made a little jumper and now it works.

I'm sorry. I thought because you answered the other guys question in this thread that this would be the best place to ask. So, no jumpers? Gotcha. I'm still under ten builds. This is number nine. Last was the super hetrodyne. I posted a trouble shooting thread for that, but didn't get any tips...

Good morning. I just completed the sea horse with all recommend mods. I'm not getting any power or effect. Should I have jumpered the removed resistors and capacitors? Thank you.

Looks sweet! I built the AionFx version, but haven't experienced what your talking about with the gain maxed. I think they also said it may self oscillate if the treble is turned up all the way, but I don't have this issue either. Hmm, I wonder what I did differently?

If there is no continuity between pin 9 on ic 4046 and the potentiometer for rate could this be my issue? Please help me. I obviously have no idea what I'm doing.

Still not having much luck on my own. Has anyone experienced a similar problem? Is there anyone in the forums that could help in anyway? Any bread crumbs would be much appreciated.

Really haven't made any headway with this. Which of the IC's would control the oscillator section? I don't really understand how to trace the schematic to figure out where to start. Thanks. https://docs.pedalpcb.com/project/PedalPCB-SuperHeterodyneReceiver.pdf

Hello. This my seventh pedal build, but first one this expensive and with so many ic's. I also lost my mind when I started building it and soldered the pots,and switches on the wrong side.... I finally got it all straightened out and put together, but only the square wave and subharmonic parts...