Recent content by Vild

  1. V

    Rat sorbet squealing

    Progress: The squeal was affected by all the knobs so I knew it had to be early in the circuit. Started scoping and as soon as it got to pin 3 it was weird from there so really early in the circuit. I then realized that I didn't connect pin 1 and 2 of the tl072. So I fixed that. I shortened a...
  2. V

    Rat sorbet squealing

    I suppose there's no easy way to troubleshoot this Rats nest is there? Voltages Q1 9.22 2.45 0 Tl072 1 8.64 2 1.35 3 2.29 4 0 5 2.88 6 4.61 7 4.61 8 9.21 Op07 1 9.11 2 4.45 3 4.48 4 0 5 0 6 4.91 7 9.22 8 9.12
  3. V

    Headphone amp

    I've tried it with preamp pedals and the unicab (dsm omni cabsim) and I think it works great. I recommend planning more than I did about the jack layout if you want since you have so much freedom since there is no footswitch in the way.
  4. V

    Valhalla

    Great pedal I just don't like that it's buffered and mutes the power amp out. Id build it again so I can play more crowbar riffs if Robert releases an updated board where it's true bypass and maybe has a switch to turn on/off the filtering difference of each output (or just has the power amp output)
  5. V

    Glyph Fuzz

    Back when I had a 3d printer I printed this component bender thing. It's to help get the right length but I figure it also helps spread the pressure by giving it a decent surface to sit on so I use it with germaniums. Otherwise I normally get better results bending by hand anyway.
  6. V

    PedalPCB M800 Overdrive/PAL 800 JCM Emulator 125b

    I plan to throw one of these in my next order. Is the internal tone trimpot usable enough to be worth mounting on the outside?
  7. V

    Notadoomer

    Thick and sick! All of my mpsa18's measured around 800. I decided to try out using ai to help me to not burden yall and ended up using this combination with these measurements as they were within the hfe that it recommended after analyzing the circuit. Part of me wonder if I should build a...
  8. V

    Death cap

    6 knob fuzz face. Didn't blow my mind but I'm no fuzz connoisseur. The head knob almost feels like a mid knob so it kind of feels like it has a three band eq. Pretty cool.
  9. V

    Rangefinder

    What a great classic circuit! So loud and the rotary switch is really nice when it comes to cutting the bass from the guitar especially since I use 6/7/8 string guitars. However all my germaniums were too noisy to meet the recommended spec so I just used what I had. Maybe I'll swap it for some...
  10. V

    Ultisol distortion

    Pretty sick! A little dark to go straight into a power amp hence the tone knob being all the way up lol, but works great in front of a preamp as well. So far I see it as best for thick rock and lead tones. I suppose that makes it a mighty fine MIAB. I think I ordered this board because I saw it...
  11. V

    Pro10 green (sorry i put nobleman at first hahaha)

    I didn't expect to like this pedal as much as I do. Not necessarily my style but man this has so much gain on tap and a pleasant bass/low mid hump. This and a lightspeed is all you need for a country rig as far as I can tell though it isn't my expertise. The tone knob mostly affects the highs so...
  12. V

    Pendulum harmonic tremolo

    Even with the led's and ldr's like this the pedal is really loud. At first I had them facing each other directly. Maybe I have to paint the inside of the pedal black to reduce reflections? It can get super fast so you might as well skip the rate led on the face unless you wanna cause some...
  13. V

    Muzzle

    Absolutely haha. It was one of the first five pedals I made back then so I was lucky to get the holes right. I did mess up the holes up top though lol
  14. V

    Cordyceps

    I don't have enough experience with ring mods to give a very detailed review but I think this is a cool little pedal. Clean signal seems to be raw as far as I know since there's no volume boost even with clean at max and there's no build docs. Idk what the point of the trimpot is so I think I...
  15. V

    Muzzle

    I built this back in 2020 or something but never made a build report. At first I used a 7660 and had weird noise interactions with a lot of gain pedals. A high pitch squeal which had seemingly only happened when using some other certain pedals despite using an isolated power supply. When I'd...
Back
Top