Murdock plus not engaging

[beardedburger]

Hey all,

New build, struggling to get it engaging...

Comes through fine when off, but no sound when on. I realised the led was the wrong way around and swapped it to the correct direction (cathode in square)... But even with that I don't seem to get any sound when I engage the switch.

Any help appreciated!

 

[swelchy]

since this is not a pedalpcb build you'd probably get a bit more help if you posted the build doc and schematic as well..

 

[beardedburger]

I've attached the 3pdt schematic as well. I've followed that to the letter, but I'm wondering if there's something not consistent with the gci board?

 

[jesuscrisp]

Pretty sure the footswitch daughterboard is the wrong way around. Try swapping around the input/output cables, if that does the trick you know what to switch around (the jacks).

 

[beardedburger]

You know what, I just did this an hour ago and it works. But the led still isn't lighting up. I'm wondering if I messed up the pad under the led when I unsoldered it.

 

[beardedburger]

Thanks by the way, @jesuscrisp . Really doing the lord's work there