Search results

So many vias on that board. Did they sand off the text on the ICs too?

Not that I've found. I drill out the holes to 6mm and use the black plastic clip bezels. They're easy to use and look great

Still unsure whether there's a predrilled enclosure for this from Tayda.

Is goop just epoxy?

I use eagle for the schematics and for PCBs, then just export the gerber files as a zip which is uploaded to jlcpcb. 2 weeks later I have the PCBs. Any software that allows exporting of gerber files is all you really need. I think pedalpcb uses diptrace.

Easy, layout the PCB and get it made. Jlcpcb will do you 5 for $2.

That's a nice looking unit though. I like those dark red caps.

Would that use a 5 knob enclosure from Tayda?

The pot/resistance value determines how long between repeats. The 2399 gets distorted after about 350ms so most guys keep it under that to avoid distortion. Bigger pot means more delay time but more risk of introducing distorted repeats (every chip is different). I stick a 500k pot in there...

Lower vf = more distortion, compression. Less volume. Higher vf = the opposite.

Someone somewhere approved that artwork?

Nice work. Can I ask what you used for the tone stack? I'm trying to find a bmt stack to throw into something I'm working on.

Do tayda sell the milled enclosures for this circuit?

Probably a hot cake and something like a Bluesbreaker. Both triangular knob layouts. Maybe the king of tone has a drilling template I can transplant.

Specifically I'm looking to install a couple of 3 knob pedals in a 1590xx or 1590bb. I wondered if there'd be a drilling template I can just send to Tayda rather than guessing?

You'd likely increase the gain you hear but lose volume. Usual clipping stuff.

Socket them. Try with the caps, try with a jumper wire. Job jobbed.

82s are rejected 72s due to a higher noise floor so using a tl072 is often a better idea.

I wouldn't worry about it too much. Clean durable correct soldering will make much more difference than slightly more expensive components. Metal film resistors, box caps and you're pretty much good. I stopped worrying about wima when I couldn't tell any difference apart from the colour.

Go one louder and install a blend pot like in the Gagan Easyface. Then you get fat, thin, and everywhere in between.