Search results

Thanks! :)

Thanks! :) I use Illustrator for all my pedal artwork, mainly because I normally do etching and vector images come out a lot sharper than raster with that method I find.

Hi all! My latest build is the Thermionic Deluxe. Had a slight issue with some weird grounding but I think I've solved it so I'm calling this one done! Had a quick 30 mins with it and I've got the feeling it could be 'The One'! Been looking for an amp like distortion to run into my Twin Reverb...

Well I put it back together and there is something odd going on with a couple of pots making contact with something if the nuts are tied too tight, I seem to have resolved it though by not over tightening so all sorted.

Upon removing the board from the enclosure to measure voltages (no anomalies found so looks fine) and prepare myself for some desoldering the problem is gone! So must be one of the pots in circuit A grounding on something presumably as obviously both circuits share the jacks, DC jack etc. It...

Had a look through the other caps all they all look correct. Going to measure some voltages next and compare

Pretty sure it’s a 101, thanks for having a look though!

Here’s a quick pic in case there’s something obvious! I’ll give it a proper look over tomorrow and start taking some voltages. The good thing is I can more or less just compare it with the working channel so hopefully the answer will leap out! :)

Hi all, It's late here in the UK but literally just plugged in my Thermionic Deluxe build, one channel works great and sounds awesome but the other channel (the top row of components on the PCB) is making a strange clicking/tapping oscillation of sorts and the signal is much quieter as well as...

I used this layout; https://tagboardeffects.blogspot.com/2014/05/micro-pog-dual-control-modification.html The diagram specs 10kC pots but if you read down the comments you can see people have had better results using linear taper. The value you need depends on the version of the POG you have...

Thanks! :)

Cheers Barry!

Quite proud of this one so thought I would share with you guys.. Its a modded Micro POG (mod here) which I thought I would give a new box job while I was in there! The mod is really useful for me as I mainly use two settings on this pedal when playing live so the channel switch swaps between...

Thanks Barry! I’ll check that out and see if I can apply it to a TRS jack

Hi all, Just had an idea come to mind for my upcoming Thermionic Deluxe build and wondered if anyone could tell me if it's possible and how I might approach it if so? Ideally I would like to be able to add a TRS switching jack that can enable changing between channel A & B on the pedal via a...

Transmisser would be great if do-able

That's perfect, thanks so much!

Hey all, Hoping someone may be able to help, as the title suggests I'd like to use a bi-colour LED to indicate the channel on an upcoming Thermionic Deluxe build I'm planning, can anyone shed any light on how I would go about this? I've done a bit of Googling but can't seem to find a simple...

Hey man, I’ve actually written an etching tutorial; https://diy-guitar-effects.tumblr.com/etching The tutorial covers just painting the top of the box for when the etch is recessed, to do the etch in relief as I’ve done on the Tyrian is basically the same but the artwork is reversed then you...