Search results

there is plastic insulator on the back of the pots, that blob in the pic look like solder lead but is the transparent things it come out when you solder. i checked the continuity to the pot and it's ok. I also cheked that the blob doesn't short the 2 points.

when i turn the mix knob to wet i have no sound at all the dry signal and the vol pot is ok checked voltages at FV-1 pins 6, 8 & 23 - all read 3.3v

i think they were free algos, at this point i will ask mr pcb to buy just the "software"

man i d'like to DOWNLOAD some/all the bin/source files, i don't need the eeprom , i already have it.

Are the binary files or the source files for these algorithms avaible?

everything is clear thanks, but I was wondering if it was possible to have the compiled files of the algorithms present in the custom eeprom list found on the site, so as to make a personalized setlist myself. @PedalPCB

I just got an Octagon, is it possible to have all the programs available so I can load or modify them to my liking? I already have a chip programmer, I just need the algorithms thank you

tried the cap modification, but it's too subtle, I think I'll try the wampler one or maybe part of it MOD DETAILS: R57 - change to 3k3 R44 and R62 - change to 1k C28 - change to 10nf capacitor AND 1k resistor in parallel D8 - change to 1N4001 D9 - change to 1N4001 AND 1N34A in series D11 -...

I use it on a jcm900 with hotrails minibukers 👍 i will try this mod thank you

I have an old Boss DS2, I like the way it sounds but I would like to remove some of the fizzy, can you recommend some mods?

by mistake I had put a 10k resistor in the r7 and also in the r12! thank you very much to everyone and to @Robert :love: , now the pedal sounds great! thanks to this forum I have saved my ass a lot of times 🙏

with gain pot to max those 4 pins are connected pot gain to zero those are connected

Some specific advice?

ic1 pin 7 is 4.5v and S4 is 0v ic2 pin 8 is 16.30v ic2 pin 4 -8,6v

same issue

yes a plastic adesive button

everything seems to work well except the gain potentiometer, at zero no problem, then as it turns up I hear a decrease in the general volume and an increase in compression and towards the end the distortion increases, yet I tested the 2 germanium diodes before mounting them and they work. the...

+1 General Tso a great comp

I compared the dandy to the neo clone, you can get the same tone but warmer and more musical, the neo clone and probably also the small clone it's as if they cut the low frequencies and sound more metallic.

update: in flange mode with blend on and zero feedback and setting the other controls by ear I got the most convincing sound I've ever had for Soundgarden's black hole sun verse (the high guitar part)