Search results

IC3 is being powered from from the same point on the pcb as IC4. Power comes down from D4 to C32 and then to R69. On top there's a trace that goes from R69 to IC3 and on bottom of R69 is the trace that connects over to C41. From there it powers the left side of the board. I'm not sure how it...

I only had one defective Low Tide board. I know of someone else who had 2 though. No idea if it was the same issue as this though. Could definitely be something unrelated. The other defective board I had was the Dirt Dauber. Both had the same kind of issue. Frustrating but both an easy fix so no...

Sorry I already fixed it and boxed it back up before seeing this. It’s a very small connecting trace.

Yeah it did help me learn something. Just glad I got it out of my box of shame. Although I feel no shame with this one after the PCB itself was bad 😂

In this case the LED not lighting told me there was some kind of voltage problem after I eliminated the wiring, foot switch and a defective LED. I do agree In most cases it's useless but in this case it helped lead me back to where the voltage was being lost at the broken trace. Either way...

So I realized I wasn't getting any voltage in the LM258 (IC4). Pin 8 was reading at zero volts. I jumped the 9v power to pin 8 and it everything worked. Pretty sure I got another PCB with a bad trace. The trace from R69 to C41 on the bottom of the board seems to be broken underneath the layer...

I agree that it might not be of value in most cases. That's what I was getting at when I said I had seen pedals not work but the led still did. In this case the LED not working at all when I give it ground must mean it's not getting voltage. It seems like part of the pcb isn't getting any. Gonna...

Footswitch and wiring is good. It seems like part of the PCB isn't getting voltage.

Yeah the foot switch is good too.

Thanks to everyone for the replys. All ICs came from reputable suppliers. Either Mouser, Small Bear or Stomp box parts. The LED not working is throwing me off a bit. I've seen pedals not work before but the LED still turned on.

A builder I follow on instagram built two of these and neither worked. Starting to think I'm having the same issue as the other defective PCB I got with the bad trace. Or maybe something is up with the included randomizer IC? I feel like the bypass LED would still work even if there were an...

I'm getting around 8.1v on one side and around 5v on the other. Zero volts in the middle. Using a battery off my bench that's around 8.65 volts. I swapped out all of the ICs except for the one that came with the PCB. If somehow there were something wrong with that IC I feel like the LED would...

Built a Low Tide Modulator sometime last year, it didn’t work and ended up in the box of shame. Went through everything I can think of but no luck. It bypasses signal but nothing happens when switched on and the LED doesn’t turn on either. There seems to be voltage coming into the board, I...

I just built the Conqueror too and love it. For those who have built both the Conqueror and Mystery Machine is it normal for the Conqueror to have more gain? Even with the distortion knob maxed on the MM the Conqueror still gets fuzzier.

So I did the rate LED Mod on this and used two LEDs in series and it works good. A 5mm diffused yellow inside and a 3mm diffused red for the rate. Doesn't seem to have any effect on the voice pot or anything else that I can tell. The PCB mania version of this pedal (submarine device) is...

Is it two LEDs connected in series with ones anode and the others cathode connected to PCB?

Possibly could be a bad trace (faulty connection) in the daughterboard on the 3pdt switch. Or maybe even a faulty 3pdt but that seems less likely since the LED is getting switched on. Sounds like it's powering up ok and connecting to ground to switch the LED on but not getting any sound when...

Thanks 👍 I figure whatever the average hfe is of the ones I have should probably be ok. I have a 2n1302 that's around 40-50 hfe waiting to get stuffed in 😁

Hey nice build! Are there any special hfe values for the 2n5089 and the 2n3904 in this build? Thanks

Looks great. Thanks!