Search results

I haven't made Panna Cotta in quite sometime, don't know why everybody loves it!

Small amps all sound slightly muffled to me, to really test a pedal I'd think you'd want an amp that really opens up. I use a twin reverb, just because that's what I have. I'm sure there are less pricey options. Put a 100K pot in a small enclosure with 2 jacks and have your buddy put it in his...

I have a Vox AC4TV, I use it mostly for harmonica, don't know that I would use it for testing pedals.

I recall a few Zinsco models from that era that were pretty bad as well.

That needs a layout that the red LED can be used in the artwork!

I think the service for each must vary with the local hubs, I get great service from UPS, so so from FedEx, and lousy service from DHL, it's like they hold my packages for days at the hub until they have something else in my area.

I think this should work: https://drill.taydakits.com/box-designs/new?public_key=RHNCR1R5aEtRTzVYQm5IU0xCQk1NUT09Cg== You may want to make the center holes a touch smaller for the switches.

Nice pedal, but no guts no glory!

So I got around to boxing up another one of these with all A100K Pots, like it much better, but it seems to me the GE diodes and the SI diodes on the left side are reversed. The switch position GE on the left sounds like the switch position SI on the right and the Position on the left label SI...

I use those and mis drilled enclosures to practice lettering painting, but not nearly often enough.

You can easily build one of those, it's just a 100k pot and two jacks.

I had a Rivera Rock Crusher for a while, was pretty good. Years ago I had a Hot Plate which also worked fairly well. Now days only the dog is bothered if I play loud.

When I order boards, I like to scan the components section for anything I might need. FV-1 projects I usually order with the Chip installed.

You can get TL072's from @PedalPCB, another good reliable source.

I Try to buy my IC's from Stomp Box, Digi-Key or Mouser, especially the ones known to be popular to fake.

I had already sealed the package, so I slit the top enough to drop them in and taped it closed. Will try to get to Post Office tomorrow.

Seems like I bought some subs for the 2134's a few weeks ago, if so, I'll throw a couple in the package with the transistors.

How many do you need?

Inkjet waterslides is why I went to a LaserJet printer!

That's what I use white washers for!