Search results

Man at page 3 you aren't even into the Scarlett Johansson pics. Looks like I didn't start commenting until around page 56, but yeah I remember reading the whole thing as it was happening. What a time to be alive.

You'll have to excuse the responses, but this is a forum dedicated to effect pedals for guitar and bass, so we're musicians, not general PCB experts. That being said a few of us actually are EE's and like looking at all types of PCBs. If you're wondering about EMI effects though we'll need to...

Sorry I missed this one, but Mick is correct. No benefit to a higher voltage for C1 unless you already have it on hand and it fits on the board. You'll be seeing low voltages there on the cathode, so 100V is more than enough. Absolutely no benefit to 0.5% tolerance resistors in this build...

100V box film caps are fine. C1 is on there, 6th from the left in the main row of components. https://www.taydaelectronics.com/0-68uf-100v-5-polyester-film-box-type-capacitor-size-small.html

ADSP is another product line from Analog Devices, which would make me guess it uses the same SHARC architecture as the ADAU series. If you can't figure out how to write an algorithm for FV-1, you're not going to like the development process for SHARC.

I've done a couple designs with ADAU1701, and there are a couple things that make me think that's not it. The ADAU1701 datasheet calls out a 12.288MHz clock for 48kHz sampling, and that board calls out a 24MHz clock. Also ADAU1701 typically uses a BJT as part of its internal regulator to...

Yup, the whole thing is obviously backwards.

Everyone in my house has an electric toothbrush, so I just use whatever brush the dentist gives my kids, so I get a new one every 6 months.

Unagi E4305 transformers are out of stock on the website right now, so you won't be able to get them by themselves or with Nobelium or Steddi Go PCB sets. I placed a restock order in August, they're expected to ship towards the end of October.

Bassdude is based on the 5D6 Bassman, which does indeed have a shared cathode connection across two triodes, but since each triode acts as an input stage for the respective channel you're only using one at a time, which made me think the 820Ω cathode resistor for V1A was fine for Bassdude...

There have already been a large number of resources suggested in this thread. Start with those. Also, as stated before, if you want to share what your general goal in modification is we can certainly point you in a more specific direction.

A quick summary: 1) Don't rush. You seem to be in a hurry to get in there and start poking around, and I think that is what is scaring people. "Tube amps can kill you" is not hyperbole. You can actually feasibly die. We're not trying to gatekeep, obviously you can't learn how to work on amps...

If you're trying to remove resistors and capacitors at random, you're going to run into some problems. There are of course rules to follow. Some weirdo made a post a while ago with an introduction to tube preamp design, that may have some useful information for you. But perhaps if you could let...

If you're set on using SpinCAD so you can listen to patches without FV-1 hardware but aren't trying to learn how to use SpinCAD to write patches yourself, you're going to have a hard time.

The FV-1 is capable of providing pitch-shifting effects, but it doesn't do it anywhere near as well as the POG or the Whammy. You could build a rough approximation of these pedals, but it would not work as well, and as @Paradox916 mentioned you will likely be disappointed if you compare it to...

Honestly my main suggestion for ipad would be to make sure you have some kind of drawing app. The main thing I use my tablet for is convenient referencing of existing schematics and doodling new ideas for schematics. Then when I get to a computer (don't get throat punched by the missus) I...

The Noble/Nobelium uses a Fender-style tonestack with a fixed mids response. It's a shelving filter with no fixed frequencies, and the controls are very interactive. That being said, you could try increasing the value of the 270pF cap in the tonsetack to something like 470pF or 500pF, that...

If you have the files you want in .spn but you want to listen to them, why not flash them to an EEPROM and listen to them with an actual FV-1? If your goal is to listen to the patches it seems like that would be the easiest way to do it rather than try to convert them back into SpinCAD format.

I'll mostly address this paragraph here. My test setup is a looper and my recording interface into a pair of studio monitors. This gives me a consistent platform so I know exactly what the output should look like each time. If there's a new design that I haven't verified before, I will run the...