Search results

Anyone notice that the new Alpha Potentiometers(without the dust covers) from Tayda feels loose? The older stock with the dust covers feels better and doesn't slide easily when turned. Better stickier "feel" in my opinion.

How to etch labels like this?

Glory Hole x Mach 1 Mach 1 is actually a Southern Belle pcb. Order switch on top

What would happen if you replace the Gain pot to A1M value?

Comparing the PedalPCB Paragon Mini and AionFX Theseus I noticed something different. The R16/R30 from Paragon is not in the Theseus. What does it do for this circuit?

What would be the advantages and disadvantages of these opamps? Let's start with the RAT. Original uses LM308/OP07. The EHX Flatiron used LM741.

The Mach 1 is not available now. Is it possible to build the Mach 1 on the Southern belle pcb?

The 4pdt switch I got seems to be taller. Adding the thicker enclosures from Tayda(not complaining), the potentiometer shafts and the 1p8t rotary threads can’t get through the holes. Had to unsolder… unsolder 27 legs and lift them up a bit from the pcb.

Sabbath Distortion Isosceles Boost

try 1n914 or 1n4148 on the first stage.

I already figured out the LED part. Tested the R1 approach and it does pop. Should I cut the signal before(red) R1 or after(blue)?

I just want this Go to 3:00 mark

Second footswitch to remove the dry signal.

Would this be how the Dry Out switch is done? Potentiometer’s leg 3 is lifted from the pcb. On Dry Out 1 and 2 are shorted. On mixed Leg 3 is connected to Pad 3 on the PCB.

I built several of the QoB2 preCOVID 1590BB casing

Do you use 9v power supply or 18v?

https://www.pedalpcb.com/product/paragon/ https://aionfx.com/project/theseus-dual-overdrive/ https://rullywow.com/product/queenofbone2/ AionFX's does not have the charge pump but has the "High Gain" mode. I've built the QoB2 before and it was quite a pleasant build. I'm looking at the Paragon...

Did anyone notice that the sweep goes up to ~30k before going down to ~26k at around 2 o’clock ?

would these work? https://www.mouser.ph/ProductDetail/KEMET/SSR21NH-07405?qs=pfd5qewlna5BCvRgPMa8XA%3D%3D https://www.mouser.ph/ProductDetail/Triad-Magnetics/C-36X?qs=y9m3SKnhpLPlfz0DyYWbXA%3D%3D