Search results

Hen's Tooth Only tweak to this one is the Nanolog N2 in place of the silicon diodes Pepper Box I used an LM108h in the clipping stage, and an OP-07 in place of the second 308. Used a 150r in place of R3 to give the Low trimpot a bit more range Pumbaa I used a metal can OP-07, and...

To sate my own curiosity and desire to constantly build stuff, I recently whipped up a bunch of Rat variants. Didn't go heavy on the mods, but I'll note what changes I've made to each one. First up, the rat0log (Triad Distortion). I decided to replace the diodes with Nanolog N2 and N3...

No- the white PCB is a Moonn Why Not Both, and it's wired for the delay clock capacitor. For the tape warp switch, I'll have to dig up my notes

Could definitely fit in the Q

Honestly, not that I've noticed. It might be more apparent on a daisy chain or similar

Attach the middle and one of the outer lugs of an SPDT toggle to the holes marked in red

It's been a while since I've had it built and sold on, but I don't recall any ticking with these ones

It'd be easier to just lift one leg of R14, attach that leg to one lug of the switch. Then, attach the other lug of the switch to the now vacant resistor pad Your LED wiring will work as drawn

I do this a lot, so here's the schemes I use- Treat A1/2/3 as a single pole and it's throws on a footswitch, and you can fit three x2 pots and an led indicator on a 4PDT

If you want it to sound like the Ibanez SK10 / FC10, yes

NE5534

Inserter a switch between C8 and R14 that severes the connection

For a quick mod, you can play with the value of C2. Increase it to something like 10n for some heavier filtering

Off the top of my head, the Op-amp Big Muff uses one pre-clipping for that warmer fuzz texture, and the Octarock uses a few at various points to aid in tracking Personally, I'm a fan of the dirt in the Prunes, but a heavier fuzz would do well. You could try clipping diodes on the feedback loop...

This - I'd recommend a Sallen-Key type LPF, the Prunes loves heavily low passed signals. It also loves being driven by suboctaves I'm curious to see/ hear the results with the Timmy front end, but I've a feeling it'll be kinda underwhelming. It's neither filtered heavily or particularly...

Sine and triangle do sound very similar, there's probably not anything wrong in that department. For lower speeds, increase C6

The two middle jacks basically act as an effects loop. Or, if wanted, you can swap the order

I have one in storage, and I buy a new one like once a year, and end up selling them on

Wanted to get space-age saucy with a build, and figured @jimilee's take on my favorite circuit was the perfect thing The right side has a Raytheon OP-07, with silicon / germ, none, and red / infrared clipping The left side has a NatSemi LM308, with silicon, infrared, and D9K clipping Wired it...

It is!