Search results

Ha, yes. I am pretty sparing with the solder on switches, no flooding the pads here for potentially easier removal if needed. Continuity checks out and I have access to all 3 waveforms

All good. you provided me with confirmation that it isn’t supposed to sound like that

Calling @DGWVI and @Mentaltossflycoon and anyone else who might have thoughts. Mkay, not the reason I thought I was going to open this thread, but while my vibrobot is trem-ing, it has some distortion/fuzziness on the signal. After chasing rabbits before lifting pin 6 I am 99% sure of parts...

Can confirm, lift pin 6 (I got my IC from Robert). Just spent the better part of the afternoon checking values, probing, tracking voltages, checking connectivity, EVEN CLEANED OFF THE 🤬 SOLDER MASK/FLUX which I NEVER do, and was even ab to open my own thread then I did this and all is well.

I installed a home rolled vactrol and jack in my sonic reducer on the mod pads so I could use my Wavelord to drive the LFO. It was great in theory, but certainly lacking in the irl department. Really, the C19 is large physically, but it’s not a terrible build. @DGWVI do those new boards have CV...

I use this stuff (might be the same Amazon fare you mentioned) and have no complaints I like that the insulation doesn’t shrink on heating. I think the rebound is more based on it being a non-bonded stranded than the insulation itself. Bonded acts more like a solid core

Just as a comparison, this was my original enclosure Wooden box I made. Stevie’s enclosure has elevated it exponentially

It’s a cool project, all the bleeps and bloops. The tedious part is that LED matrix 256 LEDs…. You have the option to omit it, but why would you?

The one thing I didn’t want to do was mar the front so the one trace I did identify as lifted I put a jumper wire across the back, that way nothing gets in the way of the full glory of the finished project.

Yeeeeaaaah, Stevie’s work deserved the shout out regardless of my unsoldering ineptitude.

Awhile ago I presented a unique project to @steviejr92 it took a lot of planning on his part and time waiting on his new brake and cnc to fully realize the scope, but man did he come through. Some of you may have seen the teaser in the What’s in the Mailbox thread, some of you on IG may have...

do you have another circuit that you could test your clock and BBD chips in just to make sure they are good? And since it is always a good practice, have you audio probed through to the BBD to make sure there is signal reaching it?

Nice job resurrecting that little beastie. The mobius is a cool delay, but a bitch of project. Seeing that sweet powder coat makes me regret not looking at this build report before hitting the checkout at Tayda

Any chance of seeing an Equilux mini face plate in the near future? Asking for a friend…..

Or use this: https://www.pedalpcb.com/product/fv1x/ Over/under clocking can have some cool effects on your…….effects

Meh. It goes where you think it sounds best. I personally like the rangemaster before, but that is only my opinion. Either way I treat the rangemaster the same as the fuzz face and run them both before buffers

Now you have a Sunlion I think there was an order switch

When you say “synth like” what is your baseline tone? For subtractive synth I usually do the octave pedal->envelope filter->square wave fuzz. If that is what you are after, consider the Madbean Junktrunk when he gets restocked. It’s an OTA envelope filter and excels at getting those slow sweeps...

That’s perfect! Exactly what i was looking for. Thank you

You sir are becoming my DI sensei and I thank you