Search results

The FX loop is great, but one drawback is that when the Spectron is off, so is the FX loop. So if you've got a nice always-on light gain that you'd want on all the time but also not affect the envelope trigger, then having this separate output would allow you to turn off the Spectron but still...

Sorry for yet another double-post. I found even more issues with the rear jack hole locations in the drill template I posted, so I'd recommend not using them. More details on my build post: https://forum.pedalpcb.com/threads/aionfx-spectron-meatball-mountain.13577/

Hello fellow builders! This is one I've wanted to build for quite a while. It's often ranked near or at the top of lists of the best envelope filters. I had a bunch of obstacles during the build but it all worked out fine - and maybe have an idea for a useful mod! Here it is: So, why the...

I've also done this before (with a handheld drill) and ended up with slightly crooked knobs because despite my best efforts it was not drilled at a perfect 90 degree angle. In this case, it's hardly noticeable unless you're looking for it but I'd still recommend using a drill press or some kind...

If you have a cheap DMM like me, it may not be accurate with smaller resistance values. Do you have some 100Ω resistors to test?

That's my current plan. Between making the hole slightly larger (horizontally), filing away at the aluminum (but not too much to interfere with the screw post) and shaving down the side of the box jack I think I can make it fit. Edit: Success!

Hi, sorry for spamming up your thread. I just noticed an issue with the drill template I sent in my first reply. I hadn't taken the screw posts into consideration and just copied the hole locations from Aion's template, so now my In and Out jacks will not fit. I'd recommend moving the rear jack...

Here is my drill plan for the Quadratron, but I haven't had this one made yet - https://drill.taydakits.com/box-designs/new?public_key=dG91TUVNSDN5aE1ONGd0VytrZGpwZz09Cg== As before, adjust your LED holes depending on what mounting solution you're going to be using, etc. I didn't mention...

Wow, thank you all for the kind comments and reacts. I had a chance to try the pedal a little bit more today and I'm really enjoying it! It seems quite versatile, especially with the mods.

Hello, I can confirm that all the potentiometers and switches are in the correct location. I just started on the offboard components today. The hole for the DC jack is too small and I had to drill it a bit bigger, though. Have fun with your build!

I haven't yet tested this (it only recently arrived) but this is my drill template for the Spectron: https://drill.taydakits.com/box-designs/new?public_key=ZnJXYlREM1NSWkE1bHpPam9rek9kUT09Cg== (of course, adjust the LED holder holes & power jack holes as needed) I'll report back if I run into...

Hello! I've been making pedals for a while so I figured I should probably starting putting my builds up here :) Yesterday I finished this fun build. I followed this excellent mod guide for PedalPCB's Paragon (King of Tone) - https://forum.pedalpcb.com/threads/paragon-pcb-mods.10487/ The guide...

Hello, I just had a rather frustrating troubleshooting session and the culprit ended up that I had put way too much solder on my footswitch PCB when attaching it to the 3PDT, and it was causing the audio signal to short to ground *under the PCB* where I couldn't see it. If I had tested the...

Thank you for the link! These look fantastic. What do you use to finish/seal enclosures if not clearcoat? I'd love an alternative as I've also had the same experience with Krylon. Cheers!

Hello, I think it would be real handy if I could order a pile of PCBs to "secure" them while waiting for other PCBs to arrive in the store. It's a little frustrating when you've got an order planned except for one PCB that is out of stock, then when that last PCB comes back into stock, a 2nd...

Thank you! I just searched for "5.1v zener" on Tayda and ended up with a 1N5231B. Cheers!

My TPA3118 arrived today and I am excited to see what is possible with it. Watching this thread, for sure!

Ah, perfect! I'm quite happy as I was looking for an excuse to upgrade my pedalboard's power supply. Haha. Thank you for the information and for all your hard work putting this project together. I'm looking forward to assembling it and hopefully I won't have to bug you with any more questions. :)

This is a fantastic project. Thank you, @vigilante398. I'm about to pull the trigger on this, as my first time trying to build something with tubes. I saw in the interview that temol posted that the latest release of the pedal runs on 12V. What power requirements does this circuit have? Thanks...

Very cool! Will we be able to attach images to store reviews?